Python Serial Port Example Windows Product

Port (str) – is the serial port to manage and open (ex: ‘SERIAL’, ‘CELL’). Baudrate (int) – The clock rate (when 0 the current rate will be used). Bytesize (int) – The number of bits per byte. Parity (str) – The parity, ‘E’, “N’, or ‘O’.

I have encountered an issue using pyserial to find serial number of FTDI chip on different operating systems:
Under Raspberry Pi 3B+
/dev/ttyUSB1 (USB VID=0403) Serial#:=AJ02WA8P
Under Windows 10
COM14 (USB VID=0403) Serial#:=AJ02WA8PA
Notice the added 'A' in serial number.
I also tried several other FTDI adapters, same observations. Can anyone else confirm this observation?
Edit: There is an FT_Prog tool that FTDI provides I used to read serial number. There was definitely no A in the end. I also tried an ATMEGA16U2 serial chip, the serial number is correct on windows.

Digi Realport is a set of operating system drivers which make remote IP-based serial ports appear as local physical ports. Traditionally Digi Realport uses TCP/IP only and talks to a very special low-level driver in Digi products. Unfortunately, at present these low-level drivers in products such as the X4 and X8 gateways literally expects to talk to the hardware serial ports. Thus there is no way to connect standard Digi Realport to a Python script.

However the latest versions of Digi Realport for Windows has added a UDP mode which ONLY moves serial data, emulating a 3-wire RS-232 cable. The data it sends is well packed into a single UDP packet and works very well with protocols such as Modbus or Rockwell DF1. Since none of the Digi Realport protocol is included, any Python script can wait on the UDP socket and interact with a remote Windows-based host application.

Supported products

Digi Realport for Windows (such as P/N 40002549_xx.zip) Older versions or versions for a different OS may not have UDP support.

Digi products which support Python Zmatrix.

Setting up Digi Realport under Windows

Download the latest version of Digi Realport. This March_2010_ver.4.4.365.0_Realportdriver.zip is for Microsoft Windows XP/2003/Vista/2008 (both 32/64 bit arch).

CLICK HERE to find Realport for another Operating System or verify you have the latest Microsoft Windows version.

Installation

Unpack (unzip) the files in a suitable directory. Run the SETUP.EXE and you should see this this display:

It is easiest to install Digi Realport with your device (or one of the same model) sitting next to you on your local Ethernet. This way the setup program should find it by browsing, plus learn all of the correct capabilities automatically - once installed, it is easy to change the IP address if your device is remotely located over wide-area-network such as cellular. In the example above, we'll be enabling Realport to a Digi ConnectPort X4 gateway. If you don't see your product listed, it might not have a proper IP address configured or your Windows firewall is blocking the UDP multi-cast being used. Always temporarily disable your Windows firewall when looking for LOST Digi devices, since they will reply to the Wizard with unreachable or even NULL (0.0.0.0) IP addresses and firewalls will always discard such 'mal-formed' UDP packets.

When you see this display, then:

1. Select the device to configure.

2. Click Next.

   You should the see this display, where you can configure the basic features to use:

3. Change the Default Network Profile to UDP: Serial Data only. This changes Digi Realport to use UDP/IP instead of TCP/IP, plus the Serial Data only warning means all control signals, the ability to change baud rate (etc) is lost in this mode. Digi Realport in UDP mode literally mimics a 3-wire RS-232 line with only Txd, Rxd and signal ground lines.
4. Set the appropriate UDP port number to target as destination - the default of 2101 is likely okay.
5. Tweak other settings as desired. In this display we are configuring COM2 - you could move this to COM6 or other values. Also, with Realport in UDP mode things like Encryption and Authentication are NOT usable, even if the device supports it.

6. Click Finish.

   You should see the setup now do some work, run through a few progress displays and finally show this display:

   Both types of pools are simple to design, yet offer an incredible amount of versatility.Below ground swimming pools can be built in virtually any size and shape imaginable, from simple kidney-shaped designs to fully customized creations.Above ground swimming pools are created in the same freeform fashion as below ground pools, and are simply elevated with a few clicks of the mouse. Add Pool Stairs and Pool SeatsDesign swimming pool seats and stairs in any shape and size needed to complement your swimming pool plan. Design Below Ground and Above Ground PoolsDesign both above ground pools and below ground pools using Realtime Landscaping Architect. Both curved and sharp shapes are supported.

At this point, the computer will send any serial data written by a Windows application to COM2 to the IP address 192.168.195.14 in UDP packets to port 2101.

Changing settings within Realport in UDP mode

After you've installed Digi Realport, you can change setting through the Device Manager. You can open it several ways:

1. Right click My Computer, click Manage, Click Device Manager
2. Open System Properties, click the Hardware Tab, click the Device Manager

The Digi Realport device installs itself as a Multi-Port Adapter, right click it and select Properties. You will see this display:

Select the Advanced Tab, and select the Properties button. You will notice the Connection status is Disconnected - this is true since this is UDP/IP, not TCP/IP.

To Change the IP address

Select your Device (in this case ConnectPort X4) in the left panel and not the Port, then select the Network tab. Here you can select to use and change an IP address, or you can change to use a DNS Hostname. So while in this case the device was installed locally with a non-routing IP of 192.168.195.14, you could change it here to be the actual public IP such as 166.x.x.x. Remember to hit Apply when done.

To Change the UDP settings

1. Select the Port 1, then the tab. The COM2 shown here will match the port you installed Realport on. Pressing the HELP button will - surprise - show you some fairly complete help information.

   Click the icon on Desktop to run the Bluestacks Emulator app on Windows. And even install all of your favourite android games on your PC Laptop & MAC OSx. Go to this to get the emulator that compatible with your Operating System. Login with your Google Play Store account. Bus simulator 18 pc free download. With this emulator app you will be able to running Bus Simulator Indonesia into your Windows 7, 8, 10.

   The Local (RX) Port is the UDP source port within UDP packets, while the Device (TX) Port is the UDP destination port. In this example, the two numbers of 2101 match, but they can be any valid port numbers. The default is ideal for Windows-based clients polling the remote Digi product configured in UDP Sockets serial port profile. It sends data from the application to the Digi, and it must return it to the Local (RX) Port number.

   If the Digi product is a WANIA, CPX4 or DOIAP with the IA Engine active sending requests to the Windows host, then check the box labeled as Slave/responder mode, which disables the Device (TX) Port. In this mode, Digi realport remembers the UDP source/destination information to send the responses back to the Digi product.

2. Click Apply when you are done.